PRODUCTS
Angular Gripper 2 Finger Configuration
1

OPLE Series - Pneumatic 2-Finger Angular Grippers

2 griffe
Spring-packaged pressure plate
Grip force safety device via spring

view PDF
Add to
Quote		 Part
Number		 Gripping
Torque at
6 bar (Ncm)		 Overall
Opening Angle
in degrees		 Mass
(Kg)		 CAD
+ OPLE 30 75 0°-40° 0.08 2D 3D
+ OPLE 40 150 0°-40° 0.11 2D 3D
+ OPLE 50 400 0°-40° 0.2 2D 3D
+ OPLE 64 900 0°-40° 0.38 2D 3D
+ OPLE 80 1820 0°-40° 0.68 2D 3D
+ OPLE 100 3900 0°-40° 1.2 2D  

Features:

  • Wide opening angle
  • Grip force safety device via spring
  • Reliability
  • Compact design
  • Reduced mass
  • High load capacity of levers
  • Installation as desired
  • Air connections : sides and base
  • Force is held when air is missing
  • Warranty 24 months

Technical data:

  • Range of operating pressure : 0.3 - 0.8 MPa
  • Repeatability accuracy: 0.05 mm; over 100 cycles
  • Operating temperature: from -10°C to 90°C; version up to 130°C upon request
  • Operating principle: pistons and levers
  • Housing material: high tensile hard-coated aluminium alloy, hard-anodized
  • Material of functional parts: treated ground steel
  • Actuation : compressed air filtered (10µm), dry or lubricated
  • Maintenance: no maintenance required for the first 1.5 million cycles
  • When air is missing, the force is held by application of the spring
  • Special versions: upon request
  • Accessories: spring packaged pressure plate, force safety device
  • Overtravel 1°
  • Rating IP 20
Close window