Pneumatic Parallel Gripper
1 2 3 4

PEP Series - Pneumatic Parallel Grippers

Drop in replacement for MHZ2 AND MORE RELIABLE
NON-WEAR PARTS GUARANTEED FOR 2 YEARS

Small dimensions
2 jaws version
Stabilized force
Large strokes

view PDF
Add to
Quote		 Part
Number		 Gripping
force at
6 bars (N)		 Overall
stroke
in mm		 Mass
(Kg)		 CAD
+ PEP 10 30 16 4 7 0.055 2D 3D
+ PEP 16 94 54 6 11 0.13 2D 3D
+ PEP 20 150 86 10 17 0.23 2D 3D
+ PEP 25 200 140 14 21 0.45 2D 3D
+ PEP 32 290 / 22 / 0.75 2D 3D
+ PEP 40 445 / 30 / 1.28 2D 3D
+ PEP 56 950 / 47 / 2.6 2D 3D
+ PEP 70 1.44 / 63 / 5.2 2D 3D

Features:

  • Lubrication on both sides
  • 2 finger versions
  • Grip force safety device via spring
  • Reliability
  • Compact design
  • Reduced mass
  • High load capacity of stroke
  • Installation as desired
  • Suitable for internal / external gripping
  • Stroke range from 4 to 63 mm
  • Warranty 24 months

Technical data:

  • Range of operating pressure : 0.3 - 0.8 MPa
  • Repeatability accuracy: PEP 10...40 0.02mm; PEP 56...70 0.03mm over 100 cycles
  • Operating temperature: from -10°C to 90°C; version up to 130° upon request
  • Operating principle: wedge-hook kinematics
  • Housing material: high tensile hard-coated aluminium alloy, hard-anodized
  • Material of functional parts: treated ground steel
  • Actuation : compressed air filtered (10 µm), dry or lubricated
  • Maintenance: no maintenance required for the first 1.5 million cycles
  • When air is missing, the force is held by application of the spring
  • Special versions: upon request
  • Accessories: force-preservation device
  • Rating IP 40
Close window